Apparel Automotive Home Improvement Sports & Outdoors Tech Deals For Her
Struggleville tool deal website logo
Our site uses ads and affiliate links to generate revenue. If you make a purchase through one of our links we may earn an affiliate commission.

Amazon: Prime Day Deals From Sunex Tools!

SUNEX TOOLS 9710M 3/8-Inch Drive Metric Crowfoot Flare Nut Wrench Set, Size-10 - Size 19, 10-Piece
  • Fully polished drop forged alloy steel
  • 3/8 inch drive
  • Mounted on a convenient storage rail
  • Also available individually
  • Set includes in Metric - mm: 971010 size 10, 971015 size 15, 971011 size 11, 971016 size 16, 971012 size 12, 971017 size 17, 971013 size 13, 971018 size 18, 971014 size 14, 971019...

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 11:30 CST.


SUNEX TOOLS 9721 1/2" Drive Fractional Jumbo Straight Crowfoot Wrench Set, 14-Piece
  • EASY ACCESS: Provides access to fasteners in tight spaces.
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.
  • STORAGE RAIL: Included for easy transportation and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 6602LP 2 Ton Low Rider Steel Service Jack
  • 2.75" min height is ultra-low and ideal for sports cars, exotic cars, and flat tires
  • 24" max height is versatile and lifts high enough for pick-ups and suv's
  • Rapid rise technology with dual pump pistons reaches max height quickly in 6.5 pumps
  • 18" throw is long and reaches all lift points under vehicle
  • Low profile design is consistent throughout the whole chassis, allowing full reach beyond pinch welds

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 2641, 1/2 Inch Drive Deep Impact Socket Set, 19-Piece, SAE, 3/8" - 1-1/2", Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case
  • DEEP: Access to parts that need to reach further into the socket, such as bolted joints and clamp bolts
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners
  • CHAMFERED OPENING: Quickly aligns fastener to socket
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 2665, 1/2 Inch Drive Universal Impact Socket Set, 13-Piece, Metric, 12mm - 24mm, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case
  • UNIVERSAL DESIGN: Allows you to position socket for work in tight spaces
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners
  • CHAMFERED OPENING: Quickly aligns fastener to socket
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-01 at 12:58 CST.


Sunex Tools 9930 SAE Stubby Combination Wrench Set, 3/8-Inch - 15/15-Inch, 11-Piece
  • COMPACT DESIGN: Allows for use in confined areas.
  • BOX END OFFSET BY 15 DEGREES: Provides clearance for your fingers and other obstructions near the fastener.
  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off.
  • CHAMFERED BOX END: Allows for fast and easy guidance onto fasteners.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:59 CST.


SUNEX TOOLS 2300, 1/2" Drive, Universal Impact Joint, Cr-Mo Steel, Radius Corner Design, Flexible, Meets ANSI Standards
  • UNIVERSAL IMPACT JOINT: Adapts any socket for use in swivel applications.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • BALL DETENT: Holds socket in place.
  • FLEXIBLE: Allows for greater access around obstructions.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 1822, 1/4 Inch Drive Magnetic Impact Socket Set, 12-Piece, Metric, 5mm-15mm, Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case
  • MAGNET: Better keeps the fastener in the socket.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 3351, 3/8 Inch Drive Impact Socket Set, 51-Piece, Metric, 7mm - 22mm, Standard/Deep/ Universal, Cr-Mo Steel, Radius Corner Design, Heavy Duty Storage Case, Meets ANSI Standards
  • LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 4683, 3/4 Inch Drive Heavy Duty Impact Socket Set, 17-Piece, SAE, 1"-2", Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


Sunex 3646, 3/8 Inch Drive Low Profile Impact Hex Driver Set, 16-Piece, SAE/Metric, 1/4 Inch - 3/4 Inch, 6mm - 19mm, Cr-Mo Steel, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • SOLID ONE PIECE CONSTRUCTION: Eliminates weak points and increases durability.
  • LOW PROFILE DESIGN: Access tight spaces.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent identification.
  • HEAVY DUTY STORAGE CASE: Convenient transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-04 at 13:58 CST.


Sunex 7796 1000-Pound Air and Hydraulic Telescopic Transmission Jack
  • Universal saddle with four ratcheting arms quickly adjust to the transmission pan configuration
  • Two caster wheels have locking feature to prevent jack from moving
  • Foot-activated pump pedal for hands-free raising of the rams
  • Nylon strap tie down to secure load to saddle
  • Overload valve to prevent jack from being used beyond its rated capacity

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 2696 1/2-Inch Drive SAE 12-Point Driveline Socket Set, 7 Piece
  • Great for most limited access fasteners
  • Includes driveline sockets for Chevrolet, Chrysler, Dodge, Ford, GMC and Jeep models
  • Heavy duty blow molded storage case
  • Remove and install driveline bolts, torque converters, cylinder heads, and 4x4 transmission casings
  • SAE - inches: 5/16, 3/8, 7/16, 1/2, 9/16, 11/16, 3/4

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 2819 1/2-Inch Drive 12-Point SAE Impact Socket Set, 19 Piece
  • CR-MO alloy steel for long life
  • Heavy duty blow molded storage case
  • 12 Point sockets offer double the starting points as 6 point sockets
  • SAE - inches: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 9720A 1/2-Inch Drive Jumbo SAE Crowfoot Wrench Set, 1-Inch - 1-3/8-Inch, Fully Polished, 7-Piece (Includes Storage Rail)
  • EASY ACCESS: Provides access to fasteners in tight spaces.
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.
  • STORAGE RAIL: Included for easy transportation and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.



Sunex Tools 9707 Jumbo Fractional Combination Wrench Set, 7Piece (Includes Roll-Case), SAE Jumbo Combination Wrench Set
  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off.
  • RAISED PANEL DESIGN: Reduces the weight of the tool while maintaining overall strength.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


Sunex 9914A 14 Piece Angle Head SAE Wrench Set (FULL POLISH) CRV
  • V-GROOVE DESIGN: Aligns better with the fastener to create an anti-slip grip and prevent round off.
  • ANGLED HEADS: 15 and 60 degree angled heads provide greater access into tight work areas to complete the job easily.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 8300DP Oil Drip Pan, for Geared Engine Stand
  • For use on engine stands for T or I shaped bases. Plastic pan cradles base and collects fluid drippings from engine assemblies.
  • Shipping weight 2 lbs.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 5153DD, 1/2 Inch Drive Master Impact Socket Set, Double Deep, 29-Piece, SAE/Metric, 7/16"-1-1/4", 10mm-27mm, Cr-Mo Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case
  • Double deep: Allows for better access over long studs.
  • Flip Sockets: Two bonus deep flip sockets for quickly removing common lug nut sizes.
  • Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.
  • Radius corner design: reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • Chamfered Opening: quickly aligns fastener to socket.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


Sunex Tools 9930M Metric Stubby Combination Wrench Set, 10-Piece
  • COMPACT DESIGN: Allows for use in confined areas.
  • BOX END OFFSET BY 15 DEGREES: Provides clearance for your fingers and other obstructions near the fastener.
  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off.
  • CHAMFERED BOX END: Allows for fast and easy guidance onto fasteners.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 4695 3/4-Inch Drive SAE Deep Master Socket Set, 29-Piece
  • CR-MO alloy steel for long life
  • Industrial strength, double latch blow mold case
  • Will meet a variety of needs
  • Set includes 29 piece , Suitable for use with a 6-point 3/4-inch wrench drive

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


Sunex 1410 10-Ton, High Height, Pin Type, Jack Stands, Pair
  • Four leg steel base
  • Made of heavy schedule pipe for added strength and stability
  • Quick and easy height adjustment.Base Length:38.27 inch
  • Large saddle with locating lugs support
  • V shaped saddle to cradle axles or other under truck components

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 9732 44Pc 1/4" Dr Mini Dual Flex Head RATCHET W Socket & Bit Set
  • DUO-DRIVE RATCHET: Drives sockets and bits with ¼” and 72 teeth. The dual head design provides a bit opening and a socket attachment on the same head.
  • FLEX HEAD DESIGN: Allows you to shift the ratchet handle up to get around obstacles.
  • CR-V SPLINE SOCKETS: Provides the durability for long-lasting use. The spline design allows for SAE and Metric sizes on the same socket.
  • S2 STEEL BITS: Provides the strength for tough jobs.
  • ALL PURPOSE SET: Comes with 43 pieces for multiple uses.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-10-31 at 17:48 CST.


SUNEX TOOLS 3613V 7-Piece Long Reach Pliers Set
  • Long reach design for access in hard to reach areas
  • Non-slip, comfort grip handles for user comfort.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 10:18 CST.


Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 4304, 3/4 Inch Drive, Universal Impact Joint, Cr-Mo Steel, Radius Corner Design, Flexible, Meets ANSI Standards
  • UNIVERSAL JOINT: Adapts any socket for use in swivel applications.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • BALL DETENT: Holds socket in place.
  • FLEXIBLE: Allows for greater access around obstructions.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 533MD, 1 Inch Drive, 33mm Deep Impact Socket, Cr-Mo Steel, Radius Corner Design, Chamfered Opening, Dual Size Markings
  • DEEP: Access to parts that need to reach further into the socket, such as bolted joints and clamp bolts.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 224XD, 1/2 Inch Drive, 3/4 Inch Extra Long Deep, Impact Socket, Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings
  • - EXTRA LONG DEEP: Provides more reach to the nut and engine studs, making it useful for cable tension applications.
  • - CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • - RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • - CHAMFERED OPENING: Quickly aligns fastener to socket.
  • - DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


Sunex 8019 Heavy Duty Adjustable Work Table with Drawer, Red
  • SUNEXpress 1 Year Warranty
  • Easy to maneuver 2" casters
  • 1" deep drawer for convenient storage
  • On board screwdriver and pry bar holder
  • Air tool hose cut outs for easy storage

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex Tools SX246 Pistol Grip Needle Scaler
  • SURFACE PREP WORK: Perfect for surface prep work in the removal of rust, paint, weld slag and corrosion.
  • DURABLE: Equipped with 19 hardened steel needles for a long life.
  • POWERFUL: 1-5/8” piston stroke and 4, 500 blows per minute provide power, comfort and control.
  • LIGHTWEIGHT: Aluminum housing provides excellent durability while reducing weight.
  • BPM: 4500

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.



SUNEX TOOLS SX243 Hd 250-Mm Long Barrel Air Hammer
  • Long barrel design with 2, 200 BPM
  • Aluminum alloy housing with ergonomic comfort grip
  • Hardened steel barrel for maximum durability
  • Built-in regular or knob for easy adjustment
  • Specification ions: blows per minute 2, 200, bore (-Inch) 3/4, stroke (-Inch) 3-3/4, air inlet (npt) 1/4

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-01 at 12:13 CST.


Sunex 1310 10-Ton Medium Height Pin Type Jack Stands, Pair, Red
  • Item may ship in more than one box and may arrive separately
  • Four leg steel base and support tube made of heavy schedule pipe foradded strength and stability
  • Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy.Number of Height Adjustments:6
  • Height adjustment pin is attached to stand to prevent loss
  • Large saddle with locating lugs support and position vehicle frame

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 00:41 CST.


SUNEX TOOLS 2637L 20pc 1/2" Drive Impact Hex Driver Master Set 6in. ¼” to 9/32” and 6mm to 17mm, ,
  • Versatile 6” lengths for added reach to tighten and remove hex fasteners
  • Cr-mo. alloy steel for impacting applications
  • Radiuses corners on square drive reduce socket wear
  • Lifetime
  • Heavy duty blow molded case for storage and portability

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 1522A 22-Ton Jack Stands, Pair
  • Four leg steel base
  • Made of heavy schedule pipe for added strength and stability
  • Quick and easy height adjustment
  • Large saddle with locating lugs support
  • V shaped saddle to cradle axles or other under truck components

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex Tools 9809A Flare Nut Wrench Set, 1/4"x5/15" - 5/8" - 11/16", 9mm x 11mm - 19mm x 21mm, Fully Polished, 9-Piece (Includes Roll-Case), SAE & Metric
  • Fully polished drop forged alloy steel
  • Both SAE and metric sizes
  • Canvas pouch included
  • Available as a set or individually
  • Set includes 9 piece flare nut wrenches

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS SX264K, 1/4 Inch Drive Mini Right Angle Air Die Grinder Kit with Speed Regulator, Safety Throttle, Ball Bearing Construction, and Storage Case, 20000 RPM
  • BUILT-IN SPEED REGULATOR: Regulated speed for better control.
  • SAFETY THROTTLE LEVER: Maintain positive speed control.
  • BALL BEARING CONSTRUCTION: Allows for a longer tool life.
  • STORAGE CASE INCLUDED: Comes with a convenient, blow molded storage case.
  • FREE SPEED: 20,000 RPM

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-10-31 at 20:19 CST.


SUNEX TOOLS 9708 3/8-Inch Drive Fractional Crowfoot Flare Nut Wrench Set, 3/8-Inch - 7/8-Inch, Fully Polished, 8-Piece
  • Fully polished drop forged alloy steel
  • 3/8 inch drive
  • Mounted on a convenient storage rail
  • Also available individually
  • Set includes in SAE - inches: 970802 size 3/8, 980810 size 5/8, 970804 size 7/16, 970812 size 11/16, 970806 size 1/2, 970814 size 3/4, 970808 size 9/16, 970818 size 7/8

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


Sunex 9737 37 Pc. 3/8" Drive Bit Socket Set
  • COMPREHENSIVE VARIETY: 37 different bit sockets covering Phillips, Pozidriv, slotted, SAE Hex, Metric Hex, Torx, and tamperproof Torx.
  • HEAVY DUTY CONSTRUCTION: Bits are manufactured with S2 steel and finished with manganese phosphate.
  • SET INCLUDES: This set includes the most common Phillips, Pozidriv, Slotted, Hex, Torx, and Tamperproof Torx bit sockets.
  • CONVENIENT STORAGE: Set is packaged in EVA foam providing convenient storage.
  • Phillips: #1, #2, #3; Pozidriv: #2, Slotted: 4mm-6mm; SAE Hex: 1/8”-3/8”; Metric Hex: 3mm-10mm; Torx: T20-T55; Tamperproof Torx: TP15-TP55

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 6811 3/4 Ton Short Underhoist Stand
  • DESIGN & APPLICATION: Designed to support vehicle components only and ideal for applications completed “waist and chest high” on a two-post vehicle lift.
  • EASY TURNING & HEIGHT ADJUSTMENTS: Bearing mounted spin handle and self-locking Acme threaded screw provide easy turning and height adjustment under load.
  • STABILITY: The 12” diameter base provides extra stability.
  • SLENDER & LIGHTWEIGHT: The slender and lightweight design allows for easy handling in close quarters.
  • CONTOURED SADDLE: Supports most component configurations.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:31 CST.


SUNEX TOOLS 6710 10-Ton, Portable, Air Lift Jack
  • Narrow chassis design
  • Wiper seals protect hydraulic system from contaminants
  • Overload and bypass safety valves
  • Self-retracting ram
  • Integrated filter protects air motor

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 9729 Master Bit Set, 208-Piece
  • Full master set ideal for various applications
  • Includes standard and deep bits
  • S2 Steel construction extends bit life
  • Blow molded carrying case included for storage and portability

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


ARCAN TOOLS 1,500 lbs. Short Underhoist Support Stand (ALSS15S)
  • DESIGN & APPLICATION: Designed to support vehicle components only and ideal for applications completed “waist and chest high” on a two-post vehicle lift.
  • EASY TURNING & HEIGHT ADJUSTMENTS: Bearing mounted spin handle and self-locking Acme threaded screw provide easy turning and height adjustment under load.
  • STABILITY: The 12” diameter base provides extra stability.
  • SLENDER & LIGHTWEIGHT: The slender and lightweight design allows for easy handling in close quarters.
  • CONTOURED SADDLE: Supports most component configurations.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 40600, ¾" Drive, 48T Torque Wrench, 110 To 600'-Lb, 48 Tooth Ratcheting Mechanism, Accurate To 3% Clockwise & 6% Counterclockwise, Audible Click, Heat Treated Tube, Aluminum Handle
  • 48 tooth ratcheting mechanism
  • Accurate to 3% Clockwise and 6% counterclockwise
  • High quality internal components for professional performance
  • Desired torque is signaled by audible click and impulse
  • Heat treated tube with knurled aluminum handle for a better grip.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 80-Piece 3/8" Drive Master Impact Socket Set - SAE/Metric, 5/16"-3/4", 8mm-19mm, Cr-Mo, Radius Corner, Heavy Duty Case
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 2569, 1/2" Drive Master Impact Socket Set, 43Piece, Metric, 9mm - 30mm, Standard/Deep, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case, Universal Joint & Impact Extensions
  • LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.



43-Piece Sunex 1/2-Inch Drive Master Impact Socket Set, SAE 3/8-Inch to 1-1/2-Inch, Cr-Mo Steel, Heavy Duty Case
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 1848, 1/4 Inch Drive Master Impact Socket Set, 48-Piece, SAE/Metric, 3/16 Inch - 9/16 Inch, 4mm - 15mm, Standard/Deep, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 9726 Mini Ratchet and Bit Set, 1/8-Inch - 1/4-Inch S2 Bits, 5/64-Inch - 1/4-Inch hex bits, 38-Piece Silver
  • 36 bits to accommodate any application
  • QUICK RELEASE extension bar for hard to reach applications
  • Includes: aluminum case, quick release extension bar, ratchet handle, and 36 bits
  • Durable aluminum case for easy, compact storage

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-01 at 13:27 CST.


ARCAN TOOLS 2 Ton Extra Long Reach Low Profile Steel Floor Jack (A20016)
  • COLORS MAY VARY: XL2T = A20016
  • LIFT RANGE Provides the lowest low height (2 75”) and the highest high height (24”) compared to the average jack
  • LOW PROFILE FRAME For easy access under low ground clearance vehicles
  • DUAL PUMP PISTONS Quickly raises the floor jack saddle to load
  • STEEL CONSTRUCTION For heavy duty use

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS SX8200 Surface Blaster Kit
  • Complete rust, paint and pin stripe removal tool
  • 180 degree rotating handle
  • Planetary gear system
  • Increased torque to power through tough materials

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 6603ASJ 3 Ton Aluminum Lift
  • Rapid rise technology reaches max height of 19.3 inches in 7.5 pumps
  • Side mounted handles for easy jack positioning
  • Wide track wheels for easy maneuverability
  • Rubber saddle pad and foam bumper pad protect vehicle
  • Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 2668, 1/2 Inch Drive Master Impact Socket Set, 39-Piece, SAE, 3/8" - 1-1/2", Standard/Deep, Cr-Mo Steel, Heavy Duty Storage Case, Includes Universal Joint
  • LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 2646, 1/2 Inch Drive Deep Impact Socket Set, 26-Piece, Metric, 10mm-36mm, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case
  • CR-MO alloy steel for long life
  • Lifetime warranty
  • Heavy duty blow molded storage case
  • Includes most common metric sizes used for automotive repairs
  • Metric - mm: 10,11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33, 34, 35, 36

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-10-31 at 18:03 CST.


Sunex SXMAGMAT Flexible Magnetic Mat/Organizer, 8"x10", 40LB Rated Capacity
  • STRONG & SECURE MAGNETIC GRIP: High-power rare earth magnets ensure a strong and secure grip on tools and parts.
  • RATED TO HOLD UP TO 40LBS: Ensures tools and parts are easily organized in the engine bay, lift posts, vehicle and on your toolbox.
  • HIGH QUALITY PVC LAYER: Safeguards surfaces from scratches and damage while being resistant to common shop fluids.
  • FLEXIBLE SHAPE: Thoughtfully constructed to accommodate various applications within an automotive technician's workspace.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 6622 22-Ton, Air/Hydraulic, Truck Jack
  • Narrow chassis design
  • Wiper seals protect hydraulic system from contaminants
  • Overload and bypass safety valves
  • Self-retracting ram
  • Integrated filter protects air motor

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 3330, 3/8 Inch Drive Master Impact Socket Set, 12-Point, 29-Piece, Metric, 8mm-22mm, Standard/Deep, Cr-Mo Steel, Heavy Duty Storage Case, Includes Universal Joint
  • LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex Tools 3342 3/8 Inch Drive Master Impact Socket Set, 42-Piece, SAE/Metric, 5/16" to 3/8"
  • Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.
  • Radius corner design: reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • Chamfered Opening: quickly aligns fastener to socket.
  • Dual size markings: laser etched and roll stamped markings to ensure permanent socket identification.
  • Heavy duty storage case: convenient impact socket transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 4507, 3/4 Inch Drive Impact Hex Driver Set, 5-Piece, Metric, 14mm-24mm, Cr-Mo Steel, Dual Size Markings, Heavy Duty Storage Case
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools
  • SOLID ONE PIECE CONSTRUCTION: Eliminates weak points and increases durability
  • LOW PROFILE DESIGN: Access tight spaces
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent identification
  • HEAVY DUTY STORAGE CASE: Convenient transport and storage

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 2826 1/2-Inch Drive 12-Point Metric Impact Socket Set, 26-Piece
  • CR-MO alloy steel for long life
  • Heavy duty blow molded storage case
  • 12 Point sockets offer double the starting points as 6 point sockets
  • Metric - mm: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 34, 33, 34, 35, 36

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 9914M Metric Angle Wrench Set, Fully Polished, 6mm - 19mm, 14-Piece
  • Forged from the FINEST GRADE ALLOY STEEL - the best choice for strength and durability
  • 15 degree and 60 degree angled ends for added convenience

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.



SUNEX TOOLS 1874 1/4" Drive Master Fractional and Metric Impact Sockets Set
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-02 at 12:51 CST.


SUNEX TOOLS 4638, 3/4 Inch Drive Deep Impact Socket Set, 14-Piece, SAE, 3/4" - 1-5/8", Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case
  • LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
  • DEEP: Access to parts that need to reach further into the socket, such as bolted joints and clamp bolts.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 2625 1/2" Drive Head Bolt Socket Set, 5-Piece
  • 4-inch length reaches past cam and rocker assembly to service head bolts
  • Includes head bolt sockets for Nissan, Toyota, Honda, and Ford/GM cars and trucks
  • Forged from high quality chrome-molybdenum alloy steel for maximum durability
  • Thin profile sockets will reach through the access hole and past overhead camshaft
  • All Sunex impact sockets meet or exceed ASME specifications

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 1818 1/4-Inch Drive Magnetic Fractional and Metric Impact Socket Set, Inch/Metric, Standard, 6-Point, Cr-Mo, 3/16-Inch - 1/2-Inch, 5mm - 15mm, 23-Piece
  • MAGNET: Better keeps the fastener in the socket.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 3657, 3/8 Inch Drive Universal Impact Socket Set, 10-Piece, Metric, 10mm - 19mm, Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards
  • UNIVERSAL DESIGN: Allows you to position socket for work in tight spaces.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex Tools 8-Piece CR-MO Steel Socket Set, 1/2-Inch Drive, Pipe Plug, Male/Female, SAE: 7/16'' to 5/8'', Heavy Duty Storage Case, Meets ANSI Standards, Model 2841
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools
  • TAPERED MALE SQUARE DRIVE: Quickly aligns socket to fastener
  • CHAMFERED FEMALE SQUARE DRIVE: Quickly aligns socket to fastener
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent identification
  • HEAVY DUTY STORAGE CASE: Convenient transport and storage

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 1120SS Combination Screwdriver Set, 20Piece, Cabinet, Slotted, Philips, Torx, Flaking & Abrasion Resistant, Enhanced Durability, Comfortable Handle, Quick Reference, Bolster, Storage Tray
  • Matte finish to resist flaking and abrasions.
  • Vapor blasted tip for enhanced durability.
  • Over molded handle for user comfort.
  • Quick reference on handle end.
  • Bolster for optional added torque, available on the slotted and Phillips screwdrivers.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 3690, 3/8 Inch Drive Universal Impact Socket Set, 12-Point, 12-Piece, SAE, 5/16" - 1", Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case
  • UNIVERSAL DESIGN: Allows you to position socket for work in tight spaces.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 4696 3/4-Inch Drive SAE Master Impact Socket Set, Standard, 6-Point, Cr-Mo, 3/4-Inch - 2-7/17-Inch, 29-Piece
  • CR-MO alloy steel for long life
  • Heavy duty blow molded storage case (over 30 inches tall)
  • Wheel kit and grip handle for easy maneuvering
  • Set includes 29 chrome molybdenum alloy steel jumbo impact sockets

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 9911M 13 Pc. V-Groove Metric Wrench Set in EVA Foam 7mm-19mm
  • COMPREHENSIVE VARIETY: Comprehensive size range from 7mm to 19mm, ensuring you have the right tool for a wide variety of automotive and mechanical tasks.
  • EVA FOAM: Wrenches come neatly organized in custom-cut EVA foam, providing excellent protection and organization, and making it easy to locate the right size quickly.
  • OPEN END & BOX END: Wrenches have a standard open-end on one side and a convenient 12-point box-end on the other, giving you veresatile options.
  • STAMPED SIZE MARKINGS: Wrenches are stamped with sizes and then chrome plated, providing clear identification and corrosion resistance.
  • COMFORT GRIP: Wrenches feature a comfortable grip and ergonomically designed handles, reducing hand fatigue during extended use.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX SXSW1001 Air Body Saw, including 24T and 32T saws
  • SMALL LIGHTWEIGHT DESIGN: at 8” length and only 1.390 lbs
  • SMOOTH PERFORMANCE: Cuts through 2mm mild steel with smooth performance
  • OVERCOMES STALLING: At 9,000 RPMs, strong industrial motor overcomes stalling and gets the job done quickly.
  • ADDED SAFETY FEATURE: Variable speed safety throttle prevents accidents.
  • COMFORT GRIP: Reduces cold and hand fatigue.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 3649 SAE & Metric Impact Hex Driver Set
  • 3649 – 3/8” dr. Sae and metric Impact hex driver Set. 13 pc.
  • All Sunex tools impact sockets are forged from the highest quality chrome molybdenum alloy steel for long life
  • Packaged in compact blow molded case for durable, convenient storage and transport.
  • All sockets Available individually

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 20250, 1/2" Drive, 48T Torque Wrench, 30 To 250'-Lb, 48 Tooth Ratcheting Mechanism, Accurate To 3% Clockwise & 6% Counterclockwise, Audible Click, Heat Treated Tube, Aluminum Handle
  • 48 tooth ratcheting mechanism
  • Accurate to 3% Clockwise and 6% counterclockwise
  • High quality internal components for professional performance
  • Desired torque is signaled by audible click and impulse
  • Heat treated tube with knurled aluminum handle for a better grip.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 9730 1/2-Inch Drive Jumbo Metric Crowfoot Wrench Set, sizes 24-32, 8-Piece
  • EASY ACCESS: Provides access to fasteners in tight spaces.
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.
  • STORAGE RAIL: Included for easy transportation and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 2645, 1/2 Inch Drive Impact Socket Set, 26-Piece, Metric, 10mm-36mm, Cr-Mo Alloy Steel, Radius Corner Design, Heavy Duty Storage Case
  • LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..MEETS...

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.



Sunex Tools 8514 300-Pound Capacity Telescoping Tractor Seat with Parts Tray and 3.5-Inch Heavy Duty Casters
  • EASY HEIGHT ADJUSTMENT: Nitrogen filled lift cylinder allows for easy height adjustment from 18” to 22”
  • STEEL TOOL TRAY: Designed with a large, reinforced tool tray attached to the bottom of the seat. Allows you to keep your tools close while staying comfortably seated
  • MOBILE: Designed with heavy duty, chrome finished casters with rubber treat
  • MOBILE: Designed with heavy duty, chrome finished casters with rubber tread
  • PREMIUM COMFORT: Built to keep you comfortably seated for as long as you want

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 1831, 1/4 Inch Drive Deep Magnetic Impact Socket Set, 14-Piece, Metric, 4mm - 15mm, Cr-Mo Alloy Steel, Heavy Duty Storage Case, Meets ANSI Standards
  • MAGNET: Better keeps the fastener in the socket.
  • DEEP: Access to parts that need to reach further into the socket, such as bolted joints and clamp bolts.
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex Tools 9707M Jumbo Metric Combination Wrench Set, 7Piece (Includes Roll-Case)
  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off.
  • RAISED PANEL DESIGN: Reduces the weight of the tool while maintaining overall strength.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS SX1819T, Heavy Duty Rivet Gun, Sets 3/16” and ¼” Rivets, 3690 lbs Traction Power, Nose Pieces Included, Forged Aluminum Handle, Storage Case
  • HEAVY DUTY: sets all conventional, standard, structural blind, monobolts, and t-rivets sizes 3/16” or ¼”
  • Industry leading power: provides 3690 lbs. Traction power.
  • Nose pieces included: in sizes 3/16” and ¼”.
  • Nose piece storage: Designed at the base of the tool.
  • Forged aluminum handle: made for long-term durability.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 9909 13 Pc. V-Groove SAE Wrench Set in EVA Foam 1/4"-1"
  • COMPREHENSIVE VARIETY: Comprehensive size range from 1/4" to 1", ensuring you have the right tool for a wide variety of automotive and mechanical tasks.
  • EVA FOAM: Wrenches come neatly organized in custom-cut EVA foam, providing excellent protection and organization, and making it easy to locate the right size quickly.
  • OPEN END & BOX END: Wrenches have a standard open-end on one side and a convenient 12-point box-end on the other, giving you veresatile options.
  • STAMPED SIZE MARKINGS: Wrenches are stamped with sizes and then chrome plated, providing clear identification and corrosion resistance.
  • COMFORT GRIP: Wrenches feature a comfortable grip and ergonomically designed handles, reducing hand fatigue during extended use.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex Tools 7706 Fuel Tank Adapter
  • Designed for use on all under hoist transmission jacks for the removal, installation and moving of emptied automotive gas tanks
  • Quick and easy installation to all ratcheting finger transmission jack saddle and comes with a universal adapter plate for all other saddles
  • Foam support pads can adjust for height, width and length to fit any 40 gallon gas tank configuration
  • Ground wire assembly prevents static electric discharge on older metal tanks
  • Two 8-foot tie-down straps secure the tank to the adapter

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 9714A SAE Combination Wrench Set, 14 Piece
  • BOX END OFFSET BY 15 DEGREES: Provides clearance for your fingers and other obstructions near the fastener.
  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off.
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation.
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength.
  • DURABLE CANVAS POUCH: Included for easy storage and transportation.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex SX4355 3/4-Inch Composite Impact Wrench
  • 1400 ft.lbs. of quiet power
  • One hand forward/reverse
  • Quiet Tech exhaust system delivers 90 dBA
  • Weighs only 7.55-Pound
  • Specificat ions: square dr. 3/4-Inch, torque 1,400-Feet Pound, working torque 200-1,100-Feet Pound

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 2640, 1/2 Inch Drive Impact Socket Set, 19-Piece, SAE, 3/8 Inch – 1-1/2 Inch, Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case, Meets ANSI Standards
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • CHAMFERED OPENING: Quickly aligns fastener to socket.
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-04 at 10:12 CST.


Sunex 7793B 1/2-Ton Telescopic Transmission Jack
  • Foot activated pump pedal for hands free raising of the rams
  • Extended to reach a maximum height of 74 inches
  • Lowered telescopic rams enable the transmission to be transferred from the jack to the work table
  • Nylon strap tie down secures the load to the saddle
  • Overload valve prevents jack from being used beyond its rated capacity

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex 3569 3/8" Dr. Master Hex Bit Impact Socket Set (84 Piece)
  • CR-MO Material Construction For Durability
  • Includes star bits, stubby bits, tamperproof Star and triple square
  • Blow mould case for easy storage
  • Package height:14.96"

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-02 at 20:51 CST.


SUNEX TOOLS 8516 Hydraulic Shop Stool, High-Polished Chrome Finish, Hydraulic Seat Adjustment, Vinyl Padded Adjustable Seat and Backrest, Slip Resistant Feet, 250-Pound Capacity, Silver
  • HYDRAULIC SEAT ADJUSTMENT: Easily adjust the height of the seat from 29” to 34”.
  • COMFORTABLE: Vinyl padded backrest and seat for ultimate comfort and support.
  • SLIP RESISTANT FEET: Allows leveling on uneven surfaces.
  • HIGH-POLISHED CHROME FINISH: Provides a sleek look while preventing surface corrosion.
  • MAXIMUM CAPACITY: 250 pounds

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


Sunex Tools 9917MPRA Metric V-Groove Combination Wrench Set, 8mm - 32mm, Fully Polished, 25-Piece (Includes Roll-Case)
  • Includes canvas protective holder
  • Metric sizes only
  • Lifetime warranty
  • V-groove design reduces wear on fasteners

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.


SUNEX TOOLS 2695, ½ Inch Drive Driveline Limited Clearance Socket Set, 12-Point, 9-Piece, Metric, 8mm-17mm, Cr-Mo Steel, Heavy Duty Storage Case
  • Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.
  • Radius corner design: reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
  • Bold laser mark: the higher visibility marking allows for fast identification.
  • Heavy duty storage case: convenient impact socket transport and storage.
  • Socket for various car models: Includes driveline sockets for Chevrolet, Chrysler, Dodge, Ford, GMC, and Jeep models.

Promotion availability and prices can change at any time on Amazon. Information included on this page is accurate as of 2024-11-03 at 22:39 CST.